COLOR Engraving | How to Color Metal Engraving – Backfill and Masking | Fiber Laser Tutorials

Learn how to get color engravings with a fiber laser and EZCAD by backfilling!
►Instant access to all my settings, parameters, exclusive livestreams and MORE:
►Discord Server:
►Facebook Group:
►2022 Buying Guide:

Testors Enamel Paint:
Basic Brush Set:
2″ Black Masking Tape:
Metal Picks:
Stainless Tweezers:
Felt Squeegee:
SFX 60w M7 MOPA:
Mactron JPT 30w:
Mactron JPT 50w:
Mactron 30w Synrad CO2:
Mactron 3w Inngu UV:
Ruida Red/Black Ruida CO2 Laser 100W:
Ortur Laser Master 2 Pro S2:
NEW Ortur Aufero Laser 1:
Aeon Laser:

Want to mail me something?
Laser Everything
320 N Washington Street
Suite #104
Rochester, NY 14625

Hey everyone!

We’re goin deep today! Get ready to learn how I backfill engravings with color! It takes time and a lot of patience and practice but YOU CAN DO IT. Stick with it, follow the video and practice on junk and you’ll be a pro in no time. Be sure to use ENAMEL paint!!! Acrylic just doesn’t work as well. About 3 hours dry time between coats – 8 hours for final dry. 100 grit base sand, 800 grit finish. Good luck, have fun – see you in the next one!

0:00 – Intro – Overview
0:49 – Masking
2:21 – EZCAD Settings
3:35 – Engraving
3:48 – Backfill Prep
4:48 – Backfill 1st Coat
5:46 – Backfill 2nd Coat
7:15 – Peeling and Weeding the Mask
8:37 – Sanding
9:16 – Washing
9:38 – Final Look – Thoughts
10:13 – Outro – Supporting the Channel

WARNING: Do your own research before purchasing your machine. I have done extensive research before making my purchases and spoken at length with the manufacturers before placing my order to be absolutely sure what I was getting could be imported, would work with my electrical setup and performed the tasks I wanted to perform.

A NOTE: Links above include affiliate commission or referrals. I’m part of an affiliate network and I receive compensation from partnering websites. The video is accurate as of the posting date but may not be accurate in the future. Settings used in my videos are for machines of my design and wattage, mileage may vary depending on your machine. Always test your settings on your laser before working on items in a professional capacity.

#laserengraving #colorengraving #fiberlaser